This induction will approximately take 45 minutes to complete.
PLANTATION LOGGING Co. acknowledges and embraces its responsibility to take all feasible actions to ensure the health and safety of its employees. All company employees are legally obligated to support and contribute to the company’s efforts to enhance health and safety conditions.

Contact details
PLC Myalup Log Processing Yard
Address: Finn Road, Myalup WA
Bunbury Office
Address: 218 Southwest Hwy, Bunbury WA 6230
Phone: (08) 97256440
Mobile: 0427 956 148
Email: admin@plantationlogging.com
PLC Managing Director – Jeffrey Loton
Mobile: 0427 920 144
Email: jeff@plantationlogging.com
Site Manager – Joshua Thompson
Mobile: 0431 552155
– Bunbury Firewood Supply sells commercial size loads of firewood throughout Western Australia.
– It is sustainably and legally harvested from renewable local resources.
– The product is produced by one of our firewood processing machines.
– Once the summer sun seasons it, it is put through our purpose built cleaner and loaded ready for transport. The resulting product is dry, free from dust, bark, chips and any other foreign materials.
– All incidents and / or injuries requiring medical assistance, must be reported to a PLC Manager or Supervisor immediately.
– In the event of a non-conformance, incident, injury or complaint, a PLC incident form PLC-wf-03-05, must be completed by a PLC Manager or Supervisor and signed by the worker.
– PLC Incident forms PLC-wf-03-05, are available from the PLC office.
– Co-operation from the Contractor may be required if they are involved.
Personal Protective Equipment (PPE) must be worn on this site when required
– Safety Boots
– Approved Hi Visibility day/night clothing which may include Hi-visibility
– Eye Protection – Clear safety glasses
– Hearing Protection – Ear Plugs
– Hand Protection – Gloves
– Wide brim hat and sunscreen
Hearing and Noise Protection
Hearing damage cannot be repaired so make sure your personal protection equipment (PPE) is used and kept in good condition.
To protect the employee from injury, and the company from excessive claims later, refusal to wear hearing protection in situations which are dangerous to hearing could result in dismissal.
General Information:
– New employees must undergo a hearing test before starting work.
– Hearing tests are required every 2 years for all employees.
– Regular noise level assessments will be conducted on machines and work environments to monitor changes.
– Machines necessitating hearing protection will be clearly marked with regulation warning signs.
– Hearing PPE will be promptly replaced upon request for employees working in noisy conditions.
– Operators and employees exposed to hazardous noise levels from machines or work practices must Always wear hearing protection.
– Excavators with rock breaking hammers, compressors with jack hammers, vibrating rollers, and tasks involving loading rock onto trucks pose significant risks to hearing. Employees not directly involved with these machines should maintain a distance of at least 7 meters from the noise.
– Employees can consult with supervisors to ensure that noise levels from all machines and equipment are minimized to protect operators and nearby workers.
Use of Eye Protection
To protect the employee from injury, and the company from OH&S claims at a future date, refusal to wear supplied protective glasses in the above situations may result in dismissal.
Suitable eye protection must be readily available for all employees working in situations requiring it.
While it’s the company’s duty to ensure the use of protective glasses, employees are also responsible for informing management if their glasses are defective or require replacement.
Glasses must be worn when operating drilling, cutting, breaking, or grinding machines or tools, whether in the workshop or on work sites.
Eye protection is mandatory when using saws and air compressor attachments due to their inherent dangers.
Additionally, eye protection must be provided for any activity where there’s a risk of eye injury, as identified by the employee who should notify their supervisor.
Welding poses risks to the eyes, necessitating appropriate eye protection/headwear while using welding equipment. Welding operators must position themselves behind screens to safeguard nearby workers.
– At least one of the PLC employees working on this site must have completed a First Aid Certificate.
– A large first aid kit is available on site.
– Each machine has a smaller kit in the cab. These kits must be maintained by operators. Items that are used and expired items e.g. eye wash, must be replaced. Contact PLC office for replacements.
– All first aid injuries must be reported on a PLC incident form PLC-wf-3-05.
Manual Handling
All employees should be aware of the injuries that can be caused by incorrect manual handling, lifting and movements when carrying/moving a load.
1. Stop and assess the load, seeking advice or assistance if it’s too heavy.
2. Consult management or the safety officer for heavy loads over 20kg.
3. Plan the lift by estimating the load and ensuring a clear path for placement, free of obstructions.
4. Avoid lifting alone; seek assistance from another employee.
5. Utilize mechanical means whenever possible (e.g., forklift, front-end loader, crane).
6. Refrain from placing objects on the ground if they will need to be lifted again.
7. Ensure there is ample space around the object for safe lifting.
8. Keep the load close to the body and avoid reaching out to pick it up.
9. Stretch and warm up muscles before lifting to prevent strain.


1. Bend your knees and keep your back straight while lifting.
2. Remember to breathe and engage your larger muscle groups (legs and hips) to lift by pushing through them.
3. Lift slowly and smoothly, avoiding jerky movements. When turning, move your feet rather than twisting your hips or shoulders.
All employees are encouraged to offer suggestions for improving lifting, stacking, and object handling techniques. Suggestions can be directed to the leading hand or supervisor during toolbox meetings. A suggestion may prevent serious injury to yourself or a colleague.
Remember, the weight that is too heavy, is the one that can cause injury. Different weights are suitable for different individuals. Use your judgment and ask for help when needed and be willing to assist colleagues when asked.
NO ONE should enter the loaders work area or the log area unless they have been given permission using UHF radio communication or phone call.
The operation should also stop if an unauthorised person enters the work area, if the loader operator is unsure about the safety of the work area, the operation should STOP until area is safe. While not in operation the log grab or grapple must be grounded.
Stand clear of the cutting line of the saw by at least 10 metre.
When operating a Log Processor and/or Block Cleaner the following instructions must be followed:
– Only ever operate machines that are within the manufacturer’s specifications
– Isolate plant and equipment before servicing and repairs
– Guard saw blades using a suitable means
– Never operate the machine while hands are still in contact with the logs / processed logs (i.e. firewood)
– Ensure any machine that moves or lift logs is fitted with rollover protection structures (ROPS) and falling object structures (FOPS)
In the case of a breakdown of a machine which leads to the equipment or any part of the equipment requiring repair or replacement, please follow these guidelines:
– Machinery operator to inform the Site Supervisor
– ‘Out of service’ tag to be attached and are to be left attached until the defect list is repaired.
– Site Supervisor to inform any personnel or contractors that will be affected by the breakdown.
– Site Supervisor will keep those informed of when the machine will be back in service.
– Site Supervisor will remove ‘out of service’ tag when machinery is safe to use again.
The danger tag or out-of-service tag shall be utilized in the following instances:
– Before removing machine guards.
– Before working on or adjusting electrical equipment.
– Before repairing, maintaining, or cleaning plant or equipment containing hydraulic or pneumatic stored energy that could be released during work.
– To isolate hazardous plant and equipment until it is deemed safe for use.
Who should use the system?
Any person, who is authorized by the General Manager or Operations Manger to carry out the work on the plant or equipment i.e. Log Processing Yard Supervisor.
What should be done?
The individual authorized to repair, maintain, or clean the plant or equipment shall:
– Turn off the source of power or de-energize any stored energy.
– Affix an “Out of Service” Tag, indicating the date and time of attachment, and signing it.
– An instruction sheet for issuing to field personnel will be provided to you. Please refer to PLC-SI-13A and PLC-SI13B for guidance.
WHEN WORKING ON SITE
In the event of a fire:
1. The employee is to immediately dial 000.
2. Phone the PLC Office on 97256440 or mobile 0427 956 148
3. Within the employee’s capacity and training, and while considering personal safety, make efforts to suppress a fire starting on or near the worksite until fire crews arrive.
4. Be proficient in using the onsite suppression equipment to safeguard life and property.
5. Assist with evacuating personnel and equipment.
– No alcohol or illegal drugs shall be bought into the work site
– Any person affected by alcohol or illegal drugs shall be removed from the workplace and may be suspended or terminated
– Random drug testing is conducted on any PLC employee or contractor personnel, on site at the time of testing
Smoking / Vaping
– Definitely NO Smoking or Vaping on this site. We strongly encourage all our employees to refrain from smoking on firewood worksites or in and around the workshop.
General Operator Guidelines
Familiarize yourself with the operation manual and adhere to the machinery manufacturer’s safety guidelines.
1. Always maintain 3 Points of Contact when entering or exiting the cab.
2. Clear debris from the entry exit point of the machine daily before starting work
3. Before starting the machine, conduct routine safety checks and complete the Daily Safety Checklist.
4. Effective communication on the ground saves time and enhances safety. Be ready to exit the cabin to communicate with supervisors and co-workers.
5. Prohibit anyone from riding or standing near the machine during operation.
6. Exercise caution and awareness of your surroundings. Always check for obstacles or individuals before moving, turning, or reversing.
7. Operate the machine at a speed that always ensures complete control.
8. Whenever possible, avoid traveling over rocks, stumps, or other obstacles.
9. Keep the processing head low to the ground when operating with excavators and loaders.
10. Before exiting the operator’s seat, lower hydraulic attachments to the ground and deactivate hydraulic functions.
Company Guidelines:
1. Always wear designated PPE when outside your truck at a loading site.
2. Consider all machines with attachments as hazardous. Maintain eye contact or use handheld radio communication with mobile plant operators.
3. Avoid standing near or behind machines at any time.
4. Before approaching machines, ensure communication or establish eye contact with the operator.
5. Exercise caution when walking behind machines parked or stopped on steep grades or hills.
6. Never walk or work under suspended loads. Maintain a safe distance while loads are being lifted.
7. Lower hydraulic attachments to the ground before leaving the operator’s seat.
8. When working with machines equipped with attachments, monitor and alert the operator if safety pins or chains are not properly connected.
9. Refrain from riding on the machine unless equipped with a properly provided seat and belt.
10. Adhere to safety instructions regarding eye, hearing, and head protection when working near machines.
11. Prevent unauthorized individuals from entering the work area. As ground personnel, you are better positioned to identify hazards to the public or fellow workers from machines or trucks. Notify the foreman or site safety officer promptly and ensure corrective action is taken.
